Klüber Molybkombin UMF T4 Spray


Klüber Molybkombin UMF T4 Spray is a air-drying, easy-to-apply bonded coating based on MoS2


Your benefits at a glance


– Good adhesion to metals for good wear protection
– Good wear protection due to high pressure resistance of the bonded coating
– Increased operational reliability with clean and dry surfaces


Your requirements – our solution


Due to increasing cost pressure, operators expect good temperature stability and reduced maintenance costs. To decrease your operating costs, we developed MOLYBKOMBIN UMF T4 Spray. Our aim was to offer you an easy to use product, so it comes in a spray can for easy application.

MOLYBKOMBIN UMF T4 Spray is an air-drying, black bonded coating based on molybdenum disulfide (MoS2), an organic binder and an inflammable solvent mixture. MOLYBKOMBIN UMF T4 Spray is liquid and ready-to-use. Once applied and hardened, the bonded coating shows good wetting of metal surfaces and is very resistant to pressure. Its dry lubricating film is suitable for use at temperatures up to approx. 450 °C.




MOLYBKOMBIN UMF T4 Spray is a friction and wear reducing lubricant for the lubrication of, for example, width screw spindles in textile stenter frames. The dry coating prevents adhesion of lint and dirt to the metal surface, making maintenance and cleaning work easier while ensuring precise low-torque width adjustment of the threaded spindles for a long time. MOLYBKOMBIN UMF T4 Spray is also suitable as an assembly aid for bearings, bolts and screw connections and as running-in aid for plain bearings and sliding points. Additionally, MOLYBKOMBIN UMF T4 Spray eliminates stickslip on guide ways.

MOLYBKOMBIN UMF T4 Spray is also used in metal forming, for example to protect against wear and to extend the lifetime of drawing and cutting tools, to impregnate diecasting moulds and to lubricate cores, ejector pins and moving mould parts in pressure and gravity diecasting machines.


Application notes


Shake MOLYBKOMBIN UMF T4 Spray before use. The surfaces to be coated need to be free from oil, grease, water, corrosion and dirt.
Keep aerosol can vertical and spray in thin and uniform layers from a distance of approx. 20 cm. We recommend coating large surfaces crosswise.

MOLYBKOMBIN UMF T4 Spray contains an inflammable solvent mixture. Do not spray against naked flames or incandescent materials. Protect against direct sunlight and temperatures above 50°C.

If you wish to optimise the service life of your equipment or have any other questions regarding your application, our experts will be pleased to help you. Just contact us.



Looking for any other product version in Kluber Lubrication or other Lubricant? Just give us a call.





We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.