Klüber Kontasynth BA 100 Spray is a Spray for electrical contacts and assembly
– Easy and economical application
– Compatible with most elastomers
– No formation of non-conducting lubricant deposits
KONTASYNTH BA 100 Spray has been formulated for ease of application of a thin lubricant film on electrical contacts and plug-in connectors as well as elastomer and plastic parts. The lubricant is highly resistant to ageing and suitable for use across a wide temperature range.
KONTASYNTH BA 100 Spray can be used for the lubrication of plug-in and sliding contacts as well as for plastic parts. When properly applied, KONTASYNTH BA 100 Spray:
– provides an even, thin and extensive lubricant film
– allows simple and clean application
– is extremely economical in use
and does not require permanently installed dispensing equipment.
We recommend cleaning all parts to operate in contact with the lubricant with white spirit 180/210 and Klüberalfa XZ 3-1 prior to initial lubrication. Upon cleaning, apply clean compressed air or hot air to remove any residues. The friction point should be clean and bright (i.e. free from oil, grease or perspiration) and free from contamination particles to ensure optimum function. Fluorinated polyether oils (PFPE) are generally regarded as neutral towards elastomers and plastics (possible exception: perfluorinated rubber). Nevertheless, the lubricant’s compatibility with the materials in question has to be checked prior to series application.
© 2020 ILS Pty Ltd. ALL RIGHTS RESERVED.