Klüber Klübersynth UH1 14-31 is a synthetic smooth-running grease for the food-processing and pharmaceutical industries
– Reliable operation also at low temperatures due to soft consistency and low base oil viscosity
– Reduced risk of premature component failure due to good adhesion and anticorrosive behaviour
– Lubricant starvation prevented by very good pumpability in centralised lubricating systems
– NSF-H1 registration for higher process reliability
Klübersynth UH1 14-31 was especially developed for the foodprocessing and pharmaceutical industries. This lubricant is NSF H1-registered and therefore complies with FDA 21 CFR § 178.3570. The use of Klübersynth UH1 14-31, an NSF H1-registered lubricant, is a contributor towards the supporting of food safety. This needs to be considered not in isolation but in line with other appropriate actions which have by law to be fulfilled by a food manufacturing plant to allow for food to be manufactured safely. Klübersynth UH1 14-31 excels by its low-temperature and antiwear properties as well as good water resistance and effective wear- and corrosion protection.
Klübersynth UH1 14-31 is used on machines and equipment in the food-processing and pharmaceutical industries, preferably at lubrication points where technically unavoidable contact with the food product cannot be excluded. However, we recommend supplying all lubrication points in the area with Klübersynth UH1 14-31 so as to avoid problems of lubricant contamination. Klübersynth UH1 14-31 should preferably be used when extremely smooth running and a wide speed range are required. It is intended for plain- and rolling bearings, lifting cylinders, joints, seals, etc. as well as for the lubrication of friction points in freeze and deep-freeze tunnels or for chains which run more smoothly when lubricated with a soft grease.
Klübersynth UH1 14-31 can be applied by brush, spatula, grease gun or automatic lubricating systems. Service temperatures of Klübersynth UH1 14-31 range from -45 °C to 120 °C. For certain applications, lower temperatures are also possible. The lubricating film retains its functionality down to approx. -70 °C.
© 2020 ILS Pty Ltd. ALL RIGHTS RESERVED.